Electrical
Fault finding is a diagnostic job, not a repair job. You are paying for the process of isolating the fault to one circuit and one cause — and that is what makes the repair afterwards straightforward instead of guesswork.
Starting from RM150 per job
Starting Prices
Indicative starting prices from our 2026 market research. Final quotation depends on site condition, scope and materials.
Electrical Fault Finding starts from
Starting from RM150 per job
Prices start from the stated amount. Final quotation depends on actual site condition, scope, materials, accessibility and installation requirements.
Starting from RM80 per point
View ServiceStarting from RM60 per point
View ServiceStarting from RM80 per unit
View ServiceStarting from RM400 per unit
View ServiceStarting from RM5000 per job
View ServiceIs this the right service?
What's included
What's included
Pricing Guidance
Indicative starting prices based on current 2026 market research for Kuala Lumpur, Selangor and the Klang Valley. Final quotation depends on actual site condition, scope, materials and installation requirements.
Diagnosis and repair of power tripping, short circuit, faulty socket/switch.
Duration: 1–3 hours
Starting from RM150 per job
Prices start from the stated amount. Final quotation depends on actual site condition, scope, materials, accessibility and installation requirements.
Fast Photo Quote
Send them to us directly on WhatsApp and we will assess the Electrical Fault Finding work from the pictures before a quotation is prepared.
A wide shot, a close-up and your location are usually enough for us to assess the work.
Cost Factors
Understanding what drives price helps you compare quotes fairly and prepare useful details for assessment.
A fault present right now is much faster to find than one that appears only occasionally.
More circuits means more to isolate and test.
Faults in concealed cabling or inside a ceiling void take longer to reach.
Minor fixes are often done on the spot; larger repairs are quoted.
Our Process
We ask when it trips, what is running at the time and whether weather affects it — this often halves the search.
Circuits are isolated one at a time to identify which one carries the fault.
Testing narrows it to the specific point, accessory or cable section.
We tell you what was found and what the repair involves before doing it.
FAQs
Straight answers to the questions customers ask us most about this service.
Because until the fault is located, nobody honestly knows what the repair is. The same symptom — an RCD tripping — can be a failed water heater element, damp in an outdoor socket, or a nail through a cable. Diagnosis first, then a real quote, is the only way that is not guesswork.
That pattern usually points to water reaching something it should not: an outdoor socket, a garden light, an external light fitting, or damp getting into cabling. It is a genuinely useful clue, because it lets us start with the circuits serving outdoor and wet areas rather than testing everything.
You can narrow it down usefully. Unplug everything on the affected circuit, reset, then reconnect one appliance at a time. If it trips on a specific appliance, the fault is the appliance, not your wiring. Tell us what you found — it shortens our time on site.
Intermittent faults are the hard case, and we will say so plainly rather than keep charging for hours. Sometimes the practical answer is to monitor it, or to isolate a suspect circuit until the fault reappears. We would rather tell you that honestly than replace parts and hope.
Problems We Solve
A breaker that trips repeatedly is protecting a circuit with a problem. Renovix finds the cause safely instead of just switching it back on.
View problemA short circuit is a genuine electrical fault. Renovix locates and repairs it safely — it is not a problem to keep resetting.
View problemFlickering lights are often a wiring issue, not a bulb problem. Renovix traces the cause and fixes it at the circuit.
View problemA dead, loose or warm socket is a wiring problem, not a plug problem. Renovix repairs or replaces sockets safely and tests the circuit.
View problemA switch that sparks, flickers or feels warm is a wiring problem, not a worn-out part. Renovix replaces it safely and tests it.
View problemKnowledge Hub
Background reading on cost, materials and what the work involves.
Service Areas
Electrical installation, repair and inspection services are available across Kuala Lumpur, Selangor and the wider Klang Valley.
The federal capital — heritage shophouses, mid-century landed estates, older flats and a dense high-rise belt, all within one city.
Malaysia's most developed state — from 1950s Petaling Jaya and royal Klang to fast-growing corridors like Puchong, Kota Damansara and Cyberjaya.
Local housing stock, common problems and practical service notes for neighbourhoods and towns across the Klang Valley.
Not sure if we cover your area? Ask us — we serve most Klang Valley locations.
Get a Free Quote
Share the details of the work, your property type and location, and we will guide the next step.
